102-PCBKIT1 Contents Check List

(back to "Assembly Instructions")

Verify that the following items have been included in your 102-PCBKIT1 (Unpopulated Printed Circuit Board (PCB) with user-soldered, on-board components)

Note:  This list refers to Printed Circuit Boards marked "REV 1" (revision 1).

Description Quantity Check
Unpopulated 102-PCB REV 1 Printed Circuit Board 1

#4-40 x 1.5" Hex Standoff with 2 Screws 4

0.047 Microfarad Capacitor (C1, C3, C4, C6) 4

100 Picofarad Capacitor (C2, C12) 2

10 Microfarad Capacitor (C5, C7, C8, C9, C10, C11, C13, C14) 8

3.3 Nanofarad Capacitor (C15)


1N4004 Rectifier (CR1) 1

150,000 Ohm 1% Resistor (R1, R7) 2

15,000 Ohm 1% Resistor (R2) 1

2,200 Ohm 5% Resistor (R3) 1

6,800 Ohm 5% Resistor (R4) 1

10,000 Ohm Resistor (R5) 1

22,000 Ohm Resistor (R6) 1

12,700 Ohm 1% Resistor Ohm Resistor (R8) 1

27,000 Ohm 5% Ohm Resistor (R9, R10, R11) 3

Bias Adjust Trimmer Potentiometer, 100,000 Ohm (RV1)1

Pitch Zero Trimmer Potentiometer, 5,000 Ohm (RV2) 1

CD4001BE Integrated Circuit (U1, U2) 2

NJM2113D Integrated Circuit (U3) 1

LP2950ACZ-5.0 Integrated Circuit (VR1) 1

Text, images, and format 2016 by Harrison Instruments, Incorporated. No part of this page may be reproduced without express written consent of the copyright holder.
The 102 Minimum Theremin design is used by licensed agreement with its owner. Specifications may change without notice.

The purchase of these products from Harrison Instruments or a third party does not convey a license to the buyer.